Acronym Finder

Very Large Telescope, which briefly ELT called some kind of Observatory is a telescope that has a mirror with a diameter of 20 to 100 meters. The telescope reflective light spectrum, visible and. ultraviolet and infrared reflecting make up. Telescope, very large in addition to great functionality, to increase the likelihood of finding planets like Earth around other stars also have planned. The size of the telescope such that during radio wave work; very large is more like a telescope, Radio Observatory of Arecibo....

Wire those great people to wires or cables that transfer electricity from one point powering to a train, a tram, or wagon, metro, used to say. These electrical wires through the feeding stations in the range determined by The taken supply. Your feeding stations are usually from a network of high-voltage power are fed....

Recording device video network (NVR) is a software program for recording digital images on disk drive, flash drive, SD memory and other equipment for storage of information. NVR generally lacks a hardware recorder, but the software is usually on a special hardware with an operating system runs. to increase the efficiency and stability of the device from a Linux or standard Windows as the operating system of the device used. From NVR, usually in the system and communications network used.

for recording images analog camera with NVR can be of converter used. This set of video surveillance systems hybrids or HYBRID is said to be. Though image resolution and other specifications of the image of network camera to the camera image, analog pass will not be....

Means to convert the information digit to mark the sound in phone lines...

Production object layer (LOM) is one of the methods of rapid prototyping is. The plan has been prepared with the CAD unit control system LOM to enter. In this system, the form of the cross section work piece in a layer set and this form by the laser beam on the material that for a roll to the laser beam driven, etc., will be cut. Other parts of the level also to the cross by the laser beam cut is given that after the complete three-dimensional model, etc. can be waste material from the main model separated. The layer that is to form hanging can be cut into layers of coarser stick, then a new layer is notched, and to the previous layer to stick. This operation automatically, so repeated that all the layers are cut to stick together. Part of hairy from the original model separated to form its final appearance crafted. Level final model can be sanding pounded, rendered and painted him....

Lithography electron...

Institute of database and analytical...

The facility of testing of the mirror Fusion...